HP StorageWorks 2/16V Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 22
portcfgnport, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1 portcfgnport Note: Enter commands in lowercase only; mixed case is for readability portcfgnport Synopsis Description Enables and disables N_Port functionality for an Access Gateway port. portcfgnport [port_number] | [mode] Use this command to configure the Access Gateway port as an N_Port in the case where the AG port is connected to the enterprise fabric. The enabled N_Port automatically comes online if it is connected to the enterprise fabric switch that supports NPIV. The N_Port must have NPIV capability enabled. Note NPIV capability should be enabled on the ports connected to the Access Gateway. Use portCfgNPIVPort to enable NPIV capability on the specific port. By default, NPIV is enabled on Goldeneye. Operands This command has the following operands: port number The N_Port number to enable or disable. mode Displays current agmode setting for the switch. The default value for mode is 0 (disabled) and if the is value 1 (enabled). Examples To enable N_Port functionality for a port: Stealth:admin> portcfgnport 2 1 To enable N_Port functionality for a set of ports in a specific range: Stealth:admin> portcfgnport 2-3 1 To enable N_Port configuration for all the ports: Stealth:admin> portcfgnport Ports 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Locked N_Port .. .. .. ON ON or Stealth:admin> portcfgshow Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 Speed AN AN AN AN AN AN AN AN AN AN AN AN Locked G_Port .. .. .. ON ON Locked N_port .. .. .. ON ON Persistent Disable 12 13 14 15 AN AN AN AN See Also portcfgshow 1-8 Fabric OS Documentation Addendum Publication Number: 53-1000429-01-HP