HP StorageWorks 2/16V Brocade Fabric OS Documentation Addendum - Supporting Fa - Page 87

connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 3 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to 0. This object has the same definition as connUnitPortFCClassCap. For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway both the F_Port and N_Port this value is 0x0008. A Brocade Access Gateway supports class-three services only, therefore the value is 8 for both port types. connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is a loop, then it is the AL_PA that is connected. If this is an E_Port, then it contains only the domain ID, left justified, 0 filled. If this port does not have a Fibre Channel address, return all bits set to 1. For an F_Port, this is the Fibre Channel ID to which the connected N_port is assigned. For an FL_Port, this is the Fibre Channel ID of the FL_Port (alpa = 0). For a U or E_Port, this is similar to F_Port. The FC ID is formatted "DD AA PP" (e.g., "02 00 02"). The Brocade Access Gateway port FC ID differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a different AA value for each link. The Brocade Access Gateway "PP" is the port number for F_Ports and is always zero for N_Ports. Therefore the N_Port FC ID always appears as "DD AA 00" (e.g., "02 00 00"). On a Brocade Access Gateway the FC ID of different ports can have the same "AA" value but different "DD" values and vice versa. connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 Not supported in Fabric OS v2.6.1. The node World Wide Name of the port, if applicable; otherwise, an empty string. All related ports in within a group should have the same node WWN value. The container is defined as the largest physical entity. All ports on HBAs on a host will have the same node WWN. All ports on the same storage subsystem will have the same node WWN. This is in IEEE Extended format and the extension contains the internal port number of each port. The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port number 0 and 6 have WWN 20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively. However, the embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch. The N_Ports on a Brocade Access Gateway are the WWN of the switch (i.e., it is the same as the connUnitId). The F_Ports are the WWN of the HBA host. If the F_Port is offline, the value of the WWN is zero (00:00:00:00:00:00:00:00). connUnitLinkTable 1.3.6.1.3.94.1.12 A list of links known to this agent from this connectivity unit to other connectivity units: X is switch data and Y is other end. Fabric OS Documentation Addendum 3-7 Publication Number: 53-1000429-01-HP