HP Surestore Tape Library Model 2/28 HP DLT Tape Library 28/48-Slot - User& - Page 32
Step 2: Prepare Components, Table 2-2, Required Components, Component, Installation Notes
View all HP Surestore Tape Library Model 2/28 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Library Installation Step 2: Prepare Components Table 2-2 Step 2: Prepare Components Make sure all required components are available. Required Components Component Installation Notes Library Do not unpack the library until it is in the proper location. SCSI cards Required number of cards installed in host depends on library configuration. Connect drives to differential fast/wide SCSI cards. Connect robotics controller to a fast/wide differential or a single-ended SCSI card. SCSI cables Required number of cables (68-pin) is one per drive and one for the robotics controller. Maximum cable length (total) is 25 meters if connected to a differential SCSI card and 6 meters for a single-ended SCSI card. Power cord Power cord is included with library. Data cartridge One HP DLTtape IV data cartridge is included with library. Cleaning cartridge Cleaning cartridge is included with library. If any components are missing, contact a sales representative. 2-4