HP Surestore Tape Library Model 2/28 HP DLT Tape Library 28/48-Slot - User& - Page 65
Removing Tape Cartridges Through the Bulk Load, Access Door
View all HP Surestore Tape Library Model 2/28 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
NOTE Figure 4-5 Library Operation Removing Cartridges from the Library Removing Tape Cartridges Through the Bulk Load Access Door Some software packages require that cartridges be inserted and removed using the software. If a software package manages files in the library, check the software documentation before proceeding with these steps. To remove cartridges through the bulk load access door: 1. Verify that the drive status displays (if not, press CANCEL until it does). 2. Verify that all drives are empty ( displays after the drive number). If necessary, use the mailslot to unload tapes from the drives. 3. Press NEXT or PREV until RELEASE DOOR displays. 4. Press ENTER. DOOR RELEASED, READY, and DRIVE STATUS each display briefly, then the drive status displays. 5. Unlock the bulk load access door using the key. 6. Open the top of the door, then lift it out (see Figure 4-5). 7. Remove tape cartridges from the desired storage slots (see Figure 4-5). Removing Tape Cartridges Through the Bulk Load Access Door Library Operation 4-21