HP Surestore Tape Library Model 2/28 HP DLT Tape Library 28/48-Slot - User& - Page 90
Resolving Other Problems, Empty Picker, Vertical, Encoder, Rezero, Position To, Element, Move Medium
View all HP Surestore Tape Library Model 2/28 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Library Operation Troubleshooting Table 4-13 Robotics Controller Expert Tool Commands (Continued) Category Command Effect Tests EMPTY PICKER (continued) Unloads the picker. The cartridge is returned to its home location if it is known, otherwise to the first available empty slot. VERTICAL ENCODER Moves the picker up and down its full course of travel. REZERO Initialize robotics controller. POSITION TO ELEMENT Position picker in front of a selected slot. Utility MOVE MEDIUM Move medium from a selected source slot to a selected destination slot. EXCHANGE MEDIUM Exchange medium between two selected slots. INITIALIZE Inventories the library to determine the location of tape ELEMENT STATUS cartridges. DRIVE STATUS For use with on-line drive repair. Gets and sets the status of drives in the library. Options DISPLAY FORMAT Allows data to display as either raw hex, decoded formatted text, or both. NOTE Resolving Other Problems This section provides information on solutions to problems that may occur in the operation of the library. Table 3-5 lists steps to take before consulting a service representative. If a service call is needed, write down the library serial number before calling. The serial number is located on a label at the bottom of the library behind the left side access panel when facing the front of the library. (The access panel must be removed to see the label.) For problems that may be related to the host, refer to the host system documentation or library application software instructions. 4-46