Hitachi DV-P725U Owners Guide - Page 14

CONNECTION TO A TV (FOR VIDEO) Method 1 Method 2 Method 3 Basic Audio Good picture Better picture Best picture TV R L VIDEO IN S-VIDEO IN or COMPONENT S-VIDEO IN CR Y CB PR Y PB DVD AV Cable ANALOG AUDIO OUT S-Video Cable or S-VIDEO OUT Video Cables or COMPONENT VIDEO OUT Y CR/PR R L Analog Audio out VIDEO OUT Video out S-Video out CB/PB Component Video out • Method 1 DVD Player + TV with Video Input Jack • Method 2 DVD Player + TV with S-Video Input Jack • Method 3 DVD Player + TV with Component Video Jacks Notes ¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player. Refer to page 12. ¡Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV's 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked "TO TV") to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV's antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked "ANT IN"), then connect the RF modulator to your TV's antenna terminal as described above. Note ¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's antenna terminal through an RF Modulator. - 14 - EN 1L01