IBM 689912U Hardware Maintenance Manual - Page 20

3. Type: PCDR, then press the Enter key. 4. Follow the instructions on the screen to run the diagnostics. Note Do not start the diagnostics in the DOS session of Windows 95 or from a command prompt under Windows NT. The system must be shut down and restarted in DOS. Starting diagnostics under Windows 95 and Window NT: Use the Windows diagnostics version only if you cannot run the IBM PC Enhanced Diagnostics under DOS. 1. Select Start 2. Select Programs 3. Select PC-Doctor 4. Select PC-Doctor for Windows Diagnostics on the RTC CD The IBM PC Enhanced Diagnostics are shipped on the RTC (Ready To Configure) CD. For Type 6272 Disketteless models, the customer has the responsibility to make the diagnostics available either locally on the PC hard disk or remotely through a server. Remote Diagnostics Some computers might not have diagnostics loaded onto the local hard drive. If the computer you are servicing is connected to a server and the server has the diagnostic image, remote diagnostics can be run. (To use the diagnostics from the RTC CD, a diskette must be made from the diskette factory, then the diskette files are loaded on the server). See the customer's System Administrator for more information about remote diagnostics. Remote diagnostics require: Access to the network System Administrator to download the diagnostics or to execute remote diagnostics to the client computer. 10 IBM PC 300/700, IntelliStation Series HMM