IBM 689912U Hardware Maintenance Manual - Page 47

POST Error Code 184 Password removed due to check-sum error. (See next 184 for Type 6862, 6889, 6892) 184 Type 6862, 6889, 6892 No RFID Antenna 185 Corrupted boot sequence. 186 Type 6562, 6592, 6862, 6889, 6892 187 189 190 Chassis intrusion detector was cleared. This is information only, no action required. If this code does not clear: 1XX Not listed above. 201, 20X Memory data error. 225 229 External cache test error. 262 POST detected a base memory or extended memory type error. 301 FRU/Action 1. Enter new password 1. Make sure Asset Care and Asset ID are enabled in Configuration/Setup. 2. RFID Antenna 3. System Board 1. Set configuration and reinstall the boot sequence. 1. Riser Card, if installed 2. System Board 1. Clear Administration password 2. System Board 1. More than three password attempts were made to access the computer. 1. System Board 2. Riser Card, if installed 1. System Board 1. Run Enhanced Diag. Memory Test 2. Memory Module 3. System Board 1. Unsupported Memory 1. L2 Cache Memory 2. System Board 1. Run Setup. Check System Summary menu for memory type change. (See "Setup Utility Program" on page 220.) 2. Run the Extended Memory Diagnostic tests. 1. Keyboard 2. Keyboard Cable 3. System Board Service Information 37