IBM 689912U Hardware Maintenance Manual - Page 228

Module Testing Mode If the test programs do not find a problem, or you want to perform in-depth testing, the Module Testing mode provides a method to run individual tests on a single module. For example, you can run an individual test for the diskette drive, or you can run groups of tests for several modules. In the Module Testing mode, you can define how many times each test should run and how the test program should log the errors. To start the Module Testing mode: 1. Start the Diagnostics diskette. 2. Select Diagnostic Menu from the Main Menu. 3. Select Quick Checks from the next menu. 4. Use the up and down arrow keys (↑ and ↓) to move the highlight bar from one selection to the next. 5. Follow the instructions on the screen. Note: As you scroll down the selection menu, the Test Group window to the right changes to correspond to the highlighted Module. Running Selected Module Tests To run all selected tests for a test group: 1. Use the up and down arrow keys (↑ and ↓) to move the cursor to your selection. 2. Press Enter. Note: A ♦ appears next to your selection. Running All Selected Modules To run all selected test modules: 1. Use the down arrow key (↓) to move the cursor to the last choice, Run All Selected Modules. 2. Press Enter. Note: A ♦ appears next to your selection. Changing Selected Tests in Test Groups To change selected tests in a Test Group: 1. In the Module Tests Menu, use the up and down arrow keys (↑ and ↓) to move the cursor to your selection. 2. Press Tab to move into the expanded Test Group window. 3. Scroll to the test you want to select or deselect. Warning: Items indicated by a directly adjacent "*" (red text on color screens) are destructive tests. 4. Press the spacebar at the highlighted test to toggle between select (indicated by a ♦) and deselect. 218 IBM PC 300/700, IntelliStation Series HMM