IBM 689912U Hardware Maintenance Manual - Page 238
Rapid Resume Manager, Rapid Resume, Standby
View all IBM 689912U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Modem Ring Detect: With this feature set to Enabled, the computer will turn on automatically when a ring is detected on the internal modem. Wake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event or a daily event. Wake on LAN: If the computer has a properly configured token-ring or Ethernet LAN adapter card that is Wake on LAN-enabled and there is remote network management software, you can use the IBM-developed Wake on LAN feature. When you set Wake on LAN to Enabled, the computer will turn on when it receives a specific signal from another computer on the local area network (LAN). For further information, see "Wake on LAN" on page 230. Rapid Resume Manager Personal computers come with built-in energy-saving capabilities. Rapid Resume Manager reduces the power consumption of the computer. The following are features of Rapid Resume Manager: Rapid Resume Standby Scheduler Wake Up on Ring Rapid Resume: With Rapid Resume activated, the computer saves its current state when you power it off with the power switch. Rapid Resume retains all current settings, remembers which programs were active, and saves the position and size of windows and other objects on the screen. When the computer is restarted (with the power-on switch, the Scheduler, or Wake-Up on Ring), it quickly returns to full-power operation in exactly the same state. The programs that were being used will reappear in the state they were in when you suspended operation of the computer. Running Rapid Resume Manager: To select and activate, deactivate, or change Rapid Resume Manager, do the following. 1. From Program Manager, select IBM Management Plus. 2. Select Rapid Resume Manager. 3. View or change settings. 4. Follow the instructions on the screen. Standby: When the Standby feature is enabled, it initiates reduced power modes for the display, microprocessor, and hard disk drive after a specified period of inactivity. The default setting for automatically initiating standby is 20 minutes. The display is blanked 228 IBM PC 300/700, IntelliStation Series HMM