IBM 689912U Hardware Maintenance Manual - Page 77

Diagnostic Error Code 015-199-XXX USB port test failed, cause unknown 018-000-XXX PCI Card Test Passed 018-0XX-XXX PCI Card Failure 018-195-XXX PCI Card Test aborted by user 018-196-XXX PCI Card test halt, error threshold exceeded 018-197-XXX PCI Card test warning 018-198-XXX PCI Card test aborted 018-199-XXX PCI Card test failed, cause unknown 018-250-XXX PCI Card Services error 020-000-XXX PCI Interface Test Passed 020-0XX-XXX PCI Interface error FRU/Action 1. Go to "Undetermined Problem" on page 81. 2. Flash the system and re-test 3. Replace component under function test. 1. No action 1. PCI card 2. Riser card, if installed 3. System board 1. Information 2. Re-start the test, if need to 1. Depress F3 to review the log file. See "Viewing the Test Log" on page 209. 2. Re-start the test to reset the log file. 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined Problem" on page 81 1. Go to "Undetermined Problem" on page 81. 2. Flash the system and re-test 3. Replace component under function test. 1. PCI card 2. Riser card, if installed 3. System board 1. No action 1. PCI card 2. Riser card, if installed 3. System board Service Information 67