IBM 689912U Hardware Maintenance Manual - Page 270
IntelliStation (Type 6888
View all IBM 689912U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Total Memory 16 MB 16 MB 24 MB 24 MB 32 MB 32 MB 40 MB 40 MB 48 MB 64 MB 72 MB 80 MB 96 MB 128 MB Bank 0 SIMM 3,4 0,0 4,4 0,0 4,4 0,0 8,8 4,4 0,0 4,4 8,8 4,4 8,8 16,16 16,16 Bank 1 SIMM 1,2 0,0 4,4 4,4 0,0 0,0 8,8 8,8 4,4 4,4 8,8 16,16 16,16 16,16 32,32 Bank 2 DIMM 16 0 16 16 32 0 16 32 32 32 32 32 32 32 IntelliStation (Type 6888, 6899): Any combination of DIMM sizes is acceptable. DIMM height must not exceed 1.2 inches. If EDO NP (non-parity) DIMMs and EDO ECC DIMMs are mixed, they will configure as non-parity. Install only EDO ECC DIMMs to enable parity. See "System Board Memory" on page 248 for DIMM size, speed, and type. IntelliStation (Type 6889): DIMM sizes of 32, 64, 128, and 256 MB are acceptable. Use 100 MHz. SDRAM DIMMs. Do not mix Registered and Non-Registered DIMMs. When installing or removing memory, any sequence of DIMM size is allowed. Fill each DIMM connector sequentially, starting at DIMM socket 0. If SDRAM ECC and SDRAM (non-parity) DIMMs are mixed, they will configure as non-parity ECC. Install only SDRAM ECC DIMMs to enable ECC. See "System Board Memory" on page 248 for DIMM size, speed, and type. IntelliStation (Type 6893): DIMM sizes of 16 MB, 32 MB, 64 MB, and 128 MB are acceptable. Start filling DIMM socket 0, then 1, then 2. Use 3.3 V unbuffered 100 MHz. SDRAM Non-Registered DIMMs only. Only ECC DIMMs are supported. See "System Board Memory" on page 248 for DIMM size, speed, and type. IntelliStation (Type 6898): DIMM sizes of 16, 32, 64, and 128 MB are acceptable. Use Non-Registered DIMMs. DIMM height must not exceed 2.5 inches. If SDRAM ECC and SDRAM (non-parity) DIMMs are mixed, they will configure as non-parity ECC. Install only SDRAM ECC DIMMs to enable ECC. See "System Board Memory" on page 248 for DIMM size, speed, and type. 260 IBM PC 300/700, IntelliStation Series HMM