IBM 689912U Hardware Maintenance Manual - Page 267

The following table shows the SIMMs and DIMMs that are supported. Type SIMM SIMM SIMM SIMM Speed 60 ns 60 ns 70 ns 70 ns EDO, FP EDO FP FP FP Parity N Y N Y Sizes Supported 4, 8, 16, 32 MB 4, 8, 16, 32 MB 4, 8, 16, 32 MB 4, 8 MB DIMM 60 ns EDO N DIMM 60 ns FP Y 8, 16, 32 MB 8, 16, 32 MB PC 360-S150 Series (Type 6598) - Pentium Pro 150/200 MHz: These are the recommended combinations of memory-module kits. Each bank must contain a matched pair of SIMMs having the same size and speed. Important: If all four banks are populated, all memory SIMMs must be the same size and speed. Total Memory 16 MB 32 MB 32 MB 64 MB 64 MB 128 MB Bank 1 8 MB 8 MB 16 MB 16 MB 32 MB 32 MB Bank 0 - 8 MB - 16 MB - 32 MB PC 365 Series (Type 6589) - Pentium Pro 180/200 MHz: These are the recommended combinations of DIMMs. However, any combination of DIMM sizes is acceptable. DIMM height must not exceed 1.2 inches. If EDO NP (non-parity) DIMMs and EDO ECC DIMMs are mixed, they will configure as non-parity. Install only EDO ECC DIMMs to enable parity. Total Memory 16 MB 32 MB 32 MB 48 MB 48 MB 64 MB 64 MB 64 MB Mem 1 16 MB 32 MB 16 MB 32 MB 16 MB 64 MB 32 MB 32 MB Mem 2 - - 16 MB 16 MB 16 MB - 32 MB 16 MB Mem 3 - - - - 16 MB - - 16 MB Mem 4 Reference Information 257