IBM 689912U Hardware Maintenance Manual - Page 73

Diagnostic Error Code 006-197-XXX Diskette interface test warning 006-198-XXX Diskette interface test aborted 006-199-XXX Diskette interface test failed, cause unknown 006-25X-XXX Diskette interface Error 011-000-XXX Serial port Interface Test Passed 011-001-XXX Serial port Presence 011-002-XXX 011-003-XXX Serial port Timeout/Parity error 011-013-XXX 011-014-XXX Serial port Control Signal/Loopback test failure 011-015-XXX Serial port External Loopback failure 011-027-XXX Serial port Configuration/Setup error 011-03X-XXX 011-04X-XXX Serial port failure FRU/Action 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined Problem" on page 81 1. Go to "Undetermined Problem" on page 81. 2. Flash the system and re-test 3. Replace component under function test. 1. Diskette drive Cable 2. Diskette drive 3. System board 1. No action 1. Remove external serial device, if present 2. Run setup, enable port 3. System board 1. System board 1. System board 1. Wrap plug 2. System board 1. Run Setup, enable port 2. Flash the system 3. System board 1. System board Service Information 63