Icom IC-M804 Instruction Manual - Page 21

5 OTHER FUNCTIONS AND OPERATIONS ■ Setting a temporary operating frequency You can temporarily change the operating frequency of the selected channel. The frequency returns to the preset value after you select another channel, or turn OFF the transceiver. 1. Select a channel that is near the frequency you want to receive. 2. Push [RX/TX] to select the RX mode. • The RX icon lights blue. 3. Enter a receive frequency. 5. Enter a transmit frequency by using the Keypad keys. Push 5 TIP: • Select the digit using [◄] and [►], and change the value using [▲] and [▼], or rotating [CH/GRP]. • When you select the digit using [◄] and [►], is displayed above the selected digit. • You can directly enter a frequency by using the Keypad keys. NOTE: • If you enter a frequency that is out of the frequency range, an error beep sounds, and the channel automatically returns to the preset frequency. • If you enter a frequency using the Keypad keys and 10 seconds have passed without pressing [ENT], the channel automatically returns to the preset frequency. • BE SURE to push [ENT] after entering the frequency by using the Keypad keys. Example: Entering 6520.0 kHz [6] → [5] → [2] → [0] → [0] → [ENT] 4. Push [RX/TX] to select the TX mode. • The TX icon lights blue.  See the NOTE in step 3 to enter. 6. Push [RX/TX]. TIP: • If you want to save the entered frequency: 1. Push CH Save after the frequency is entered. • "Are You Sure?" is displayed. 2. Push OK . • The setting is saved and returns to the previous screen. 3. Push [RX/TX] or [CLR]. • If you want to change and save the frequency and other settings of the selected channel, push CH Edit to open the Channel Edit screen. See the next page for details. • Push Mode to change the operating mode to J3E, H3E, LSB, J2B, F1B, or A1A. 16