Icom IC-M804 Instruction Manual - Page 41
Sending a Test call
View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
DSC OPERATION 6 4. Confirm the contents. Rotate If the displayed data is invalid, enter the position and time data (p. 22) 5. Push Call to send a Position Request Acknowledgment. • Your position and time are transmitted. D Sending a Test call You should avoid sending Test calls on the exclusive DSC Distress channels and the safety calling channels. If you cannot avoid testing on a Distress or safety channel, you should indicate that these are test calls. Usually, the Test call would require no further calls between the two stations involved. You can send a Test call to a pre-entered Individual ID or manually enter the target station ID before sending. (p. 20) 1. Push Compose Other . 6 • The "COMPOSE NON-DISTRESS" screen is displayed. To display the screen from the Menu screen: [MENU] > Compose Non-Distress 2. Select "Message Type." Rotate + Push See page 23 for details of the Software Key functions in the DSC Task mode. 6. Push Standby Mode , and then OK to return to the Main screen. TIP: When "Position ACK" is set to "Auto (Able)," the transceiver automatically transmits a Position Request Acknowledgment. (p. 49) 3. Select "Test." 4. Select "Address." Rotate + Push Rotate + Push 5. Select an Individual ID or "Manual Input." Rotate + Push NOTE: When "Manual Input" is selected in this step, push the Keypad keys to manually enter the target station ID. ► Continued on the next page. 36