Icom IC-M804 Instruction Manual - Page 39
When Quadrant is selected
View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
DSC OPERATION 6 When "Quadrant" is selected: You can send a Geographical Area call within the square as shown below. Your vessel's position is in the upper left corner of the square. Example Latitude: 20˚N Height: 10˚ Longitude: 100˚E Width: 20˚ 4. Enter the width of the Geographical Area call area, and then push Finish . Rotate + Push 20˚N/100˚E 20˚N/120˚E 5. Go to step 6, as shown below. 6 10˚N/100˚E 10˚N/120˚E 1. Enter the latitude of your position, and then push Finish . Rotate 6. Select "Category." Rotate + Push + Push 7. Select an option. Rotate Displays your vessel's position data as the default. To select ʻNʼ (North latitude) or ʻSʼ (South latitude), select "N" or "S" on the screen and push [ENT], or push a Keypad key when the cursor is on the 'N' or 'S.' 2. Enter the longitude of your position, and then push Finish . Rotate 8. Select "Call Frequency." + Push Rotate + Push + Push Displays your vessel's position data as the default. To select ʻWʼ (West longitude) or ʻEʼ (East longitude), select "W" or "E" on the screen and push [ENT], or push a Keypad key when the cursor is on the 'W' or 'E.' 3. Enter the height of the Geographical Area call area, and then push Finish . Rotate + Push 9. Select a call frequency. Rotate + Push ► Continued on the next page. 34