Icom IC-M804 Instruction Manual - Page 9

■■Microphone 1 2 3 PANEL DESCRIPTION 2 MICROPHONE 4 ■■Software Keys Various often-used functions are assigned to the Software Keys for easy access. The function's icons are displayed above the Software Keys, as shown 2 below. DDSelecting a Software Key function Push [◄] or [►] to slide through the selectable functions that are assigned to the Software Keys. To select the function, push the Software Key under the function's icon. 1 PTT SWITCH Hold down to transmit, release to receive. 2 UP/DOWN KEYS Push to select an operating channel or group. 3 PROGRAMMABLE KEY [P] Push to activate a preset Software Key function. Ask your dealer for details. LLYou can reassign some Software Key functions to the key. (p. 18) 4 DSC SCAN KEY [D-SCAN] Push to start the DSC scan. (p. 10) Softkey 1 Softkey 2 Softkey 3 Softkey 4 Softkey 5 Softkey 6 Softkey 7 Softkey 8 ■■Optional HS-98 DDAbout the Speaker Switch When the switch is set to the " " position: You can hear the received audio from the remote controller's speaker. When the switch is set to the " " position: The remote controller speaker output is muted. •• You can hear the received audio from the handset. To output the received audio from the remote controller's speaker, put the handset into the cradle. Cradle Speaker switch Softkey 9 Softkey 10 Softkey 11 Softkey 12 Softkey 13 Softkey 14 Softkey 15 Softkey 16 Softkey 17 Softkey 18 Softkey 19 Softkey 20 LLThe key function may differ, depending on the transceiver version or presetting. Speaker Handset connector Microphone PTT switch [PTT] 4