Icom IC-M804 Instruction Manual - Page 72

Mounting the main unit, RWARNING! NEVER

Get Icom IC-M804 PDF manuals and user guides View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

8 CONNECTIONS AND INSTALLATION ■■ Mounting DDMounting the main unit You can mount the Main unit using the supplied mounting plates. RRWARNING! NEVER mount the transceiver's Main unit overhead. The weight of the Main unit is approximately 8.6 kg, and it could easily fall due to wave shocks or vibration. The unit must be mounted on a flat hard surface only. 1. Attach the supplied rubber feet to the mounting plates, if necessary. Rubber feet 2. Attach the mounting plates to the Main unit using the 6 supplied hex head bolts (6 × 15 mm), 6 flat and spring washers, as shown below. Hex head bolt (6 × 15 mm) Spring washer Flat washer Mounting plate 3. Securely mount the Main unit to a surface, which is less than 25 mm thick and can support more than 15 kg. 4. Attach the 6 supplied hex head bolts (6 × 50 mm), 12 flat and spring washers, and 6 nuts, as shown below. (Torque: 3 N•m) Hex head bolt (6 × 50 mm) Spring washer Flat washer Flat washer Spring washer Hex nut (M6) Drill 6 holes, 6 mm in diameter. 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
67
8
CONNECTIONS AND INSTALLATION
■
Mounting
D
Mounting the main unit
You can mount the Main unit using the supplied
mounting plates.
R
WARNING! NEVER
mount the transceiver’s
Main unit overhead. The weight of the Main unit is
approximately 8.6 kg, and it could easily fall due to
wave shocks or vibration. The unit must be mounted
on a flat hard surface only.
1.
Attach the supplied rubber feet to the mounting
plates, if necessary.
2.
Attach the mounting plates to the Main unit using
the 6 supplied hex head bolts (6 × 15 mm), 6 flat
and spring washers, as shown below.
Hex head bolt (6 × 15 mm)
Spring washer
Flat washer
Mounting plate
3.
Securely mount the Main unit to a surface, which
is less than 25 mm thick and can support more
than 15 kg.
4.
Attach the 6 supplied hex head bolts (6 × 50 mm),
12 flat and spring washers, and 6 nuts, as shown
below. (Torque: 3 N•m)
Hex head bolt (6 × 50 mm)
Spring washer
Flat washer
Hex nut (M6)
Spring washer
Flat washer
Drill 6 holes,
6 mm in
diameter.
Rubber feet