Icom IC-M804 Instruction Manual - Page 45

DSC OPERATION 6 D Receiving a Distress Relay call When a Distress Relay call is received: • The emergency alarm sounds until you turn it OFF. • "Received Distress Relay" is displayed. 1. Push Alarm Off to turn OFF the alarm. D Receiving a Distress Relay Acknowledgment When a Distress Relay Acknowledgment is received: • The emergency alarm sounds until it is turned OFF. • "Received Distress Relay ACK" is displayed. 1. Push Alarm Off to turn OFF the alarm. 6  When "Accept after 10 sec." or "Ignore after 10 sec." is selected in the CH Auto Switch setting, the countdown is displayed on the bottom of the window. (p. 50) After 10 seconds have passed since Alarm Off was pushed, the screen will move to the DSC Task screen or return to the Main screen. 2. Push the Software Key below the intended operation. 2. Push Close Call RCVD Window . Ignore Hold Pause Accept : Ignores the call and returns to the Main screen. : Puts the RX task on hold and returns to the Main screen. : Pauses the countdown. : Enters the DSC Task mode immediately. Rotate Rotate • One of the Emergency Frequencies is automatically selected. Monitor it because a coast station may require assistance. • Rotate [CH/GRP] to confirm the call contents.  See page 23 for details of the Software Key functions in the DSC Task mode. 3. Push Standby Mode , and then OK to return to the Main screen. • One of the Emergency Frequencies is automatically selected. Monitor it because a coast station may require assistance. • Rotate [CH/GRP] to confirm the call contents.  See page 23 for details of the Software Key functions in the DSC Task mode. 3. Push Standby Mode , and then OK to return to the Main screen. TIP: When Pause is pushed in step 2, the countdown will be paused. Push Resume to resume the countdown. 40