Icom IC-M804 Instruction Manual - Page 42
Sending a Test call Acknowledgment
View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
6 DSC OPERATION ■ Sending DSC calls (other) D Sending a Test call (Continued) 6. Select "Call Frequency." Rotate + Push 7. Select a call frequency. Rotate + Push 8. Push Call to send a Test call. • "Transmitting Test Call" is displayed, and then "Test Call" is displayed. See page 23 for details of the Software Key functions in the DSC Task mode. 9. Push Standby Mode , and then OK to return to the Main screen. D Sending a Test call Acknowledgment When you have received a Test call (p. 45), send an Acknowledgment to the calling station. When "Test ACK" is set to "Manual" (p. 49), do the following steps to send an Acknowledgment. 1. While a Test call is being received, push Alarm Off to turn OFF the alarm. 2. Push Accept . • The received call's information is displayed. If you want to immediately send an Acknowledgment "Able to comply," push Able . If you cannot communicate and want to return to the Main screen, push Ignore . If you want to put the task on hold, push Hold . 3. Push ACK . • The Call Contents screen is displayed. 4. Confirm the contents. Rotate 5. Push Call to send a Test Acknowledgment. 6. Push Standby Mode , and then OK to return to the Main screen. TIP: When "Test ACK" is set to "Auto," the transceiver automatically transmits a Test Acknowledgment. (p. 49) 37