Icom IC-M804 Instruction Manual - Page 73
MB-75 installation, CAUTION: KEEP
View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
8 CONNECTIONS AND INSTALLATION ■■MB-75 installation The optional MB-75 flush mount kit is for mounting the remote controller to a flat surface (less than 18 mm thick), such as an instrument panel. 1. Using the template on page 76, carefully cut a hole in the instrument panel or wherever you plan to mount the remote controller. 2. Slide the remote controller into the hole, as shown to the right. CAUTION: KEEP the transceiver and microphone at least 1 meter away from your vessel's magnetic navigation compass. 3. Attach the 2 bolts (5 × 8 mm) and spacers supplied with the MB-75 to both sides of the 8 remote controller. 4. Attach the clamps on both sides of the remote controller. LLMake sure that the clamps align parallel to the transceiver's body. 5. Tighten the end bolts on the clamps (rotate clockwise) so that the clamps firmly press against the inside of the instrument control panel. Clamp 6. Tighten the locking nuts (rotate counterclockwise) so that the remote controller is securely mounted in position, as shown to the right. 7. Connect the remote control cable. Locking nut End bolt 68