Icom IC-M804 Instruction Manual - Page 74

MB-108 installation, CAUTION: KEEP, CAUTION

Get Icom IC-M804 PDF manuals and user guides View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

8 CONNECTIONS AND INSTALLATION ■■MB-108 installation The optional MB-108 mounting bracket is for mounting the Main unit to a flat surface (less than 25 mm thick and can support more than 15 kg), such as an instrument panel. The MB-108 provides a one-touch attachment or detachment. 1. Attach the mounting handles with the 6 supplied hex head bolts (6 × 15 mm), 6 spring and flat washers, as shown below. Hex head bolt (6 × 15 mm) Spring washer Flat washer CAUTION: KEEP the transceiver and microphone at least 1 meter away from your vessel's magnetic navigation compass. CAUTION: Wear gloves when installing the MB-108. The edges of the MB-108 may be sharp and may cut your fingers or hands. 4. Mount the Main unit with the mounting handles attached to the mounting base. Mounting handle 2. Drill 7 holes, 6 ~ 8 mm in diameter, using the template supplied with the MB-108. 3. Attach the mounting base to a flat surface using the 7 hex head bolts (6 × 50 mm), 14 spring and flat washers, and 7 nuts supplied with the MB-108, as shown below. (Torque: 3 N•m) Hex head bolt (6 × 50 mm) Spring washer Flat washer 5. Lock the Main unit in place by closing the 4 latches on the mounting handles. x z Mounting base Flat washer Spring washer Nut (M6) 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
69
8
CONNECTIONS AND INSTALLATION
■
MB-108 installation
The optional MB-108
ÃÄÀÅÆÈÅÉ ÊËÌÍÇÎÆ
is for
mounting the Main unit to a flat surface (less than 25
mm thick and can support more than 15 kg), such as
an instrument panel.
The MB-108 provides a one-touch attachment or
detachment.
CAUTION: KEEP
the transceiver and microphone
at least 1 meter away from your vessel’s magnetic
navigation compass.
CAUTION:
Wear gloves when installing the MB-108.
The edges of the MB-108 may be sharp and may cut
your fingers or hands.
4.
Mount the Main unit with the mounting handles
attached to the mounting base.
5.
Lock the Main unit in place by closing the 4
latches on the mounting handles.
z
x
1.
Attach the mounting handles with the 6 supplied
hex head bolts (6 × 15 mm), 6 spring and flat
washers, as shown below.
Hex head bolt (6 × 15 mm)
Spring washer
Flat washer
Mounting
handle
2.
Drill 7 holes, 6 ~ 8 mm in diameter, using the
template supplied with the MB-108.
3.
Attach the mounting base to a flat surface using
the 7 hex head bolts (6 × 50 mm), 14 spring and
flat washers, and 7 nuts supplied with the MB-108,
as shown below. (Torque: 3 N•m)
Hex head bolt (6 × 50 mm)
Spring washer
Flat washer
Mounting
base
Spring washer
Flat washer
Nut (M6)