Icom IC-M804 Instruction Manual - Page 8

2 PANEL DESCRIPTION ■■Remote Controller front panel 1 SPEAKER FUNCTION DISPLAY (p. 6) 2 34 2 3 5 6 7 8 9 MICROPHONE CONNECTOR SOFTWARE KEYS (p. 4) 13 12 11 10 (pp. 63, 71) 1 DISTRESS KEY [DISTRESS] Hold down for 3 seconds to transmit a Distress call. (p. 24) 2 LEFT AND RIGHT KEYS zzPush to scroll the Software Key functions. (p. 4) zz In the Character or Number Entry mode, push to select a character or number in the table. 3 UP AND DOWN KEYS zz Push to select an operating channel, menu items, menu settings, and so on. 4 ENTER KEY [ENT] Push to set the entered data, selected item, and so on. 5 KEYPAD KEYS Push to enter numbers, letters, or symbols. 6 TUNE KEY [TUNE] When the AT-141 is connected: zzPush to start manual tuning or to bypass the tuning circuit. zzHold down to start manual tuning. LL"TUNE" is displayed after tuning is completed. LL"THRU" is displayed if the tuner cannot tune the antenna. When the other antenna tuner is connected: zzPush to start manual tuning. 7 POWER KEY [ ] Hold down for 1 second to turn the transceiver ON or OFF. 3 8 VOLUME DIAL [VOL] zzRotate to adjust the speaker volume level. zzPush 1 ~ 5 times to display the setting screens. Pushing once The Volume Setting window is displayed. Pushing twice The NB Level Setting window is displayed. Pushing 3 times The S-SQL Level Setting window is displayed. Pushing 4 times The RF Gain Setting window is displayed. Pushing 5 times The Backlight Settings window is displayed. 9 RX/TX KEY [RX/TX] Push to set a temporary operating frequency. (p. 16) 10 DSC SCAN KEY [D-SCAN] Push to start a DSC scan. (p. 10) 11 CLEAR KEY [CLR] Push to cancel the entered data or to return to the previous screen. 12 CHANNEL/GROUP SELECTOR [CH/GRP] zzPush to select the Channel Select mode or the Group Select mode. (p. 9) zzPush to set the entered data, selected item, and so on. zzRotate to select the operating channel, menu items, menu settings, and so on. 13 MENU KEY [MENU] Push to enter or exit the Menu screen.