Icom IC-M804 Instruction Manual - Page 33
While waiting for Distress ACK, Select FREQ
View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
DSC OPERATION 6 While waiting for Distress ACK 1. When "Waiting for Distress ACK" is displayed, push Cancel . 3. After sending, the following screen is displayed. Push Select FREQ . 6 See page 23 for details of the Software Key functions in the DSC Task mode. 2. Push Continue to send the Distress Cancel call. • The Distress Cancel call is sent. 4. Select a frequency to send a voice cancel message. Rotate + Push The frequencies that you have to send voice cancel messages are displayed. (Example: 2/4/6/8/12/16 MHz) To cancel the Distress Cancel call, push Back . The checkmark shows that the Distress call on the selected frequency is canceled by sending a voice cancel message. 5. Hold down [PTT] to report the purpose of the cancellation. You can display the wording of the cancellation by rotating [CH/GRP], or pushing [▲] or [▼]. 6. Repeat steps 3 to 5 to cancel on all frequencies. 7. After sending a voice cancel message on all frequencies, Finish is displayed. Push Finish . 8. Push Standby Mode , and then OK to return to the Main screen. 28