Icom IC-M804 Instruction Manual - Page 7
PANEL DESCRIPTION, Main unit front panel
View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
■ Main unit front panel 1 FERRITE EMI FILTER 2 PANEL DESCRIPTION 1 13 12 FERRITE EMI FILTER 2 2 3 4 5 6 7 8 9 10 11 1 GROUND TERMINAL [GND] (p. 64) Connects to the vessel's ground. 2 DSC ANTENNA CONNECTOR (p. 62) Connects to a 50 Ω HF marine band antenna through a 50 Ω PL-259 coax for a DSC receiver. This antenna is used for receiving Distress calls. NOTE: To receive a Distress call, BE SURE to connect an HF marine band antenna to this antenna connector. Otherwise, you cannot receive any Distress calls. 3 SPEAKER JACK [SP] (p. 62) Connects to the optional SP-24E or an external speaker. NOTE: When an external speaker is connected, the internal speaker is automatically muted. 4 GPS JACK [GPS-DATA] (pp. 63, 71) Connects to a GPS receiver to input position and UTC data for DSC operations. (NMEA 0183 ver. 4.10 format) L An NMEA ver. 4.10 (sentence formatter: GGA, GLL, GNS, RMC, VTG) compatible GPS receiver is required. Ask your dealer about suitable GPS receivers. 5 CONTROLLER CONNECTOR [CONTROLLER] (p. 62) Connects to the supplied remote controller. 6 MODEM CONNECTOR [AF/MOD] (pp. 63, 71) Connects to an external terminal unit for SSB mode operation through an RS-232C cable (D-sub 9-pin). NOTE: When connecting an external unit, detach the cover. 7 REMOTE CONNECTOR [REMOTE] (pp. 63, 72) Connect a PC through a USB to RS-422A (D-sub 9 pin) cable for remote control. NOTE: When connecting an PC, detach the cover. 8 NMEA 2000 CONNECTOR [NMEA 2000] (pp. 63, 72) Connects to the NMEA 2000 network. NOTE: When connecting to the NMEA 2000 network, detach the cap. 9 GPS ANTENNA CONNECTOR [GPS-ANT] (p. 63) Connects to the supplied GPS antenna. NOTE: Install the GPS antenna where it has a clear view to receive signals from satellites. 10 ANTENNA CONNECTOR (p. 62) Connects to a dipole antenna or an automatic antenna tuner through a 50 Ω PL-259 coax to transmit and receive any calls other than Distress calls. R WARNING! NEVER directly connect the antenna to this connector. 11 TUNER CONTROL SOCKET [TUNER] (pp. 62, 71) Connects to the control cable of the supplied AT-141 HF AUTOMATIC ANTENNA TUNER. A female connector kit is supplied to connect the AT-141. 12 POWER SWITCH [DC ISOLATE] Turns the transceiver's main power ON or OFF. 13 DC POWER SOCKET [DC INPUT] (p. 65) Connects to a 12 or 24 V DC power source through the supplied DC power cables. The red terminal is positive (+), and the black terminal is negative (-). 2