Icom IC-M804 Instruction Manual - Page 55
CH Auto Switch, NMEA Data Output
View all Icom IC-M804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
DSC OPERATION 6 D CH Auto Switch According to the regulation, after receiving a DSC call, the transceiver's operating channel is switched to the specified channel by the call. However, when this function is set to "Ignore after 10 sec.," the transceiver's operating channel is not switched, even after receiving a DSC call. 1. Open "CH Auto Switch." [MENU] > DSC Settings > CH Auto Switch 2. Select an option. Rotate + Push • Accept after 10 sec.: After receiving a DSC call, the transceiver remains on the current operating channel for 10 seconds. After that, the transceiver automatically switches to the channel specified by the call. • Ignore after 10 sec.: After receiving a DSC call, if Accept is not pushed within 10 seconds, the transceiver ignores the call and remains on the current operating channel. • Manual: After receiving a DSC call, you can select whether or not to accept the call. 3. Push [MENU] or Exit screen. to return to the Main D NMEA Data Output When receiving a DSC call from the station selected in this setting, the transceiver outputs the DSC data to the NMEA output port. You can send Distress calls regardless of this setting. 1. Open "NMEA Data Output." [MENU] > DSC Settings > NMEA Data Output 2. Select an option. Rotate 6 + Push • All Stations: From any station. • Station List: From the stations entered in the Individual ID or Group ID setting on the Menu screen. • Off: Does not output any DSC data from the NMEA Output port. 50