Icom IC-R20 Instruction Manual - Page 105

92 POCKET GUIDE iR20 ■ VFO mode selection ➥ Push [VFO MHz] momentarily to select VFO mode. ■ Memory mode selection ➥ Push [MR S.MW] momentarily to select memory mode. ■ Receive mode selection ➥ Push [MODE SCAN] several times to select the desired mode. ■ Audio level setting ➥ Rotate [L-DIAL] (or push [Y]/ [Z]) to set the audio level. ■ Squelch level setting ➥ While pushing [SQL], rotate [R- DIAL] to set the squelch level. e Complete w Fold q Cut ■ Frequency band selection ➥ Push [BAND] several times, or while pushing [BAND], rotate [RDIAL] to select the desired frequency band. ■ Tuning step selection ➥ Push [9 TS], then rotate [R-DIAL] to select the desired tuning step. • Push [9 TS] again to return to the previous condition. ■ Single band and dualwatch selection ➥ Push [DUALWATCH] for 1 sec. to toggle between single band and dualwatch operation. ■ Key lock function ➥ Push [• LOCK] for 1 sec. to toggle the key lock function ON and OFF. • " " appears when the lock function is in use. ■ Attenuator function ➥ Push [ΩΩ ATT] to toggle the attenuator ON and OFF. • "ATT" appears when the attenuator is in use. POCKET 18 GUIDE Important operating instructions are summed up in this and the following page for your simple reference. By cutting along the line and folding on the dotted line, it will become a card sized operating guide which can easily be carried in a card case or wallet, etc. ■ Frequency setting q Push [VFO MHz] to select VFO mode. w Rotate [R-DIAL] to set the de- sired operating frequency. • Entering keypad directly can be selected the desired frequency. ■ Memory channel selection q Push [MR S.MW] to select memory mode. w Rotate [R-DIAL] to set the de- sired memory channel. • Entering keypad directly can be selected the desired channel. ■ Memory bank channel selection q Push [MR S.MW] to select memory mode. w Push [BAND] several times, or while pushing [BAND], rotate [RDIAL] to select the desired bank. e Rotate [R-DIAL] to select the desired bank channel.