Icom IC-R20 Instruction Manual - Page 98
For Microsoft, Windows
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
17 DRIVER INSTALLATION !1The following screen appears when the installation is completed. Click [Finish] to close the screen. ■ For Microsoft® Windows® 2000 q Connect the IC-R20 to the desired USB port using with the USB cable, OPC-1382. • "Found New Hardware" appears as below. Click !2After clicking [Finish], the dialog appears as below. w The "Found New Hardware Wizard" will come up as below. Click [Next>]. • Rebooting the PC is recommended. 85 Click
85
17
DRIVER INSTALLATION
!
1
The following screen appears when the installation is com-
pleted. Click [Finish] to close the screen.
!
2
After clicking [Finish], the dialog appears as below.
• Rebooting the PC is recommended.
■
For Microsoft
®
Windows
®
2000
q
Connect the IC-R20 to the desired USB port using with the
USB cable, OPC-1382.
• “Found New Hardware” appears as below.
w
The “Found New Hardware Wizard” will come up as
below. Click [Next>].
Click
Click