Icom IC-R20 Instruction Manual - Page 52

7 SCAN OPERATION ■ Skip channel/frequency setting Memory channels can be set to be skipped for memory skip scan. In addition, memory channels can be set to be skipped for both memory skip scan and frequency skip scan. These are useful to speed up the scan interval. q Select a memory channel: ➥ Push [MR S.MW] to select memory mode. ➥ Rotate [R-DIAL] to select the desired channel to be a skip channel/frequency. wPush [MR S.MW] for 1 sec. to enter the select memory write condition. e Push [8 SET] several times to select "SKIP." • While pushing [8 SET], rotating [R-DIAL] can also select "SKIP." [R-DIAL] MR S.MW SET 8 FM 146..010µ -BANK-:----BNAME: -MNAME: -SKIP-:OFF >CLEAR 012 SET After 8 is pushed several times. -MNAME: >SKIP-:OFF >CLEAR 39 rRotate [R-DIAL] to select the skip condition from "SKIP," "PSKIP" or "OFF" for the selected channel. • PSKIP : The channel is skipped during memory/bank scan and the programmed frequency is skipped during VFO scan, such as programmed scan. • SKIP : The channel is skipped during memory or bank scan. • OFF : The channel or programmed frequency is scanned during any scan. tPush [MR S.MW] for 1 sec. to store the skip condition into the memory. • "SKIP" or "PSKIP" indicator appears, according to the skip selection in the step r. • Skip channel setting • Program skip setting -DUP TSQL AFC MODE FM ANL 145 700 B:GROUP1 PSKIP √ µ 033 ATT -DUP TSQL AFC MODE FM ANL 145 700 B:GROUP1 PSKIP √ µ 003 ATT "SKIP" appears "PSKIP" appears ✔ CONVENIENT! Also the skip setting can be set with the following operation for easy setting. qSelect the desired memory channel to be set as a skip channel/frequency. wWhile pushing [5 SKIP], rotate [R-DIAL] to select the skip condition from "PSKIP," "SKIP" and "OFF (no indication)."