Icom IC-R20 Instruction Manual - Page 53
Scan resume condition
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
■ Scan resume condition D Scan pause timer The scan pauses when receiving signals according to the scan pause time. It can be set from 2 to 20 sec. or unlimited. q Push [8 SET] for 1 sec. to enter set mode. wRotate [R-DIAL] to select "SET EXPAND," then push [8 SET]. eRotate [R-DIAL] to turn the expand set mode selection ON, then push [8 SET]. rRotate [R-DIAL] to select "SCAN PAUSE," then push [8 SET]. tRotate [R-DIAL] to set the desired scan time to pause from 2-20 sec. (2 sec. steps) and "HOLD," then push [8 SET]. • "2SEC"-"20SEC": Scan pauses for 2-20 sec. while receiving a signal. • "HOLD" : Scan pauses on a received a signal until it disappears. y Push [DUALWATCH] to exit set mode. SCAN OPERATION 7 IN EXPANDED SET MODE [R-DIAL] ***-SET-MODE AUTO-POWER-OFF >SCAN-PAUSE -SCAN-RESUME SCAN-PAUSE 7 DUALWATCH -2SEC -4SEC -6SEC -8SEC SET >10SEC 8 -12SEC 40