Icom IC-R20 Instruction Manual - Page 61
Tone scan
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
9 COMFORTABLE RECEIVING ■ Tone scan By monitoring a signal that is being operated with pocket beep, tone or DTCS squelch function, you can determine the tone frequency or DTCS code necessary to open a squelch. qSet the frequency to be checked for a tone frequency or code. wTurn the desired tone type, tone squelch or DTCS, ON by holding [7 TONE] with turning [R-DIAL]. • One of "TSQL" or "DTCS" appears. • Even when the pocket beep function is activated, the function is cancelled when starts the tone scan. ePush [4 T-SCAN] for 1 sec. to start the tone scan. • To change the scanning direction, rotate [R-DIAL]. Tone squelch scan [R-DIAL] 188 0 √ DTCS scan T-SCAN 4 TONE 7 013 √ r When the CTCSS tone frequency or 3-digit DTCS code is matched, the squelch opens and the tone frequency or code is temporarily programmed into the selected condition, such as memory channel. • The tone scan pauses when a CTCSS tone frequency or 3-digit DTCS code is detected. ☞ NOTE: The decoded tone frequency or code is programmed temporarily when a memory channel is selected. However, this will be cleared when the memory channel is re-selected. 9 ✔ For your convenient! Even if no tone type is selected, either tone squelch or DTCS, pushing [4 T-SCAN] for 1 sec. will also start tone scan. In this case, the tone scan searching for tone squelch frequency only. 48