Icom IC-R20 Instruction Manual - Page 76
Auto power-off function - reset
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
11 OTHER FUNCTIONS D Cloning error NOTE: DO NOT push any key on the receiver during cloning. This will cause a cloning error. When the display appears as below, a cloning error has occurred. In such a case, the receiver automatically performs ALL RESET while turning power OFF and ON. CLONE-ERROR Turn power OFF, then ON ALL-RESET -DUP TSQL AFC MODE FM ANL 146 010 PSKIP √ 63 ■ Auto power-off function IN EXPANDED SET MODE The IC-R20 can be set to automatically turn OFF after a specified period in which no operation is performed. BUSY, 120 min., 90 min., 60 min., 30 min. and OFF can be specified. The specified period is retained even when the receiver is turned OFF by the auto power-off function. To cancel the function, select "OFF" in step e below. q Push [8 SET] for 1 sec. to enter set mode. wRotate [R-DIAL] to select "AUTO POWER OFF," then push [8 SET]. • Turn the expanded set mode ON for selection. (p. 49) [R-DIAL] ***-SET-MODE MONITOR >AUTO-POWER-OFF -SCAN-PAUSE DUALWATCH SET 8 AUTO-POWER-OFF OFF -30MIN -60MIN -90MIN -120MIN >BUSY eRotate [R-DIAL] to select the desired time or to turn the function OFF, then push [8 SET]. r Push [DUALWATCH] to exit set mode.