Icom IC-R20 Instruction Manual - Page 106
Mr S.mw], 5 Skip], R-dial], Vfo Mhz], Mode Scan], Dualwatch]
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
■ Memory channel programming q Set the desired frequency and other functions in VFO mode. w Push [MR S.MW] for 1 sec. to enter the select memory write condition. • 1 short and 1 long beeps sound. e Rotate [R-DIAL] to select the desired memory channel number. r Push [MR S.MW] for 1 sec. again to program the contents into the selected channel. • 3 beeps sound. ■ Scan skip setting q Push [MR S.MW] to select memory mode. w Rotate [R-DIAL] to select the desired memory channel. e While pushing [5 SKIP], rotate [R-DIAL] to set the skip setting (skip channel or skip frequency) ON and OFF. ■ VFO scans q Push [VFO MHz] to select VFO mode. w While pushing [MODE SCAN], rotate [R-DIAL] to select the desired scan type. • Selectable from "ALL," "BAND" or "PROG xx" (xx= 0-24). √ SCAN:ALL √ SCAN:BAND √ SCAN:PROG-01 e Release [MODE SCAN] to start scan. • Rotate [R-DIAL] to change the scanning direction. • During scan, push [MR S.MW] to start auto memory write scan. r Push [DUALWATCH] to stop scan. ■ Memory scans q Push [MR S.MW] to select memory mode. • Push [BAND] to select a bank, if de- sired. w While pushing [MODE SCAN], rotate [R-DIAL] to select the desired scan type. • Selectable from "ALL," "BANK-LINK" or "BANK." SCAN:ALL SCAN:BANK-LINK SCAN:BANK e Release [MODE SCAN] to start memory/bank scan. • Rotate [R-DIAL] to change the scanning direction. r Push [DUALWATCH] to stop scan.