Icom IC-R20 Instruction Manual - Page 68

10 SET MODE D Scan pause timer Selects the scan pause time. When receiving signals, the scan pauses according to the scan pause time. • 2-20 : Scan pauses for 2-20 sec. on a received signal, and selected in 2 sec. steps. (default: 10 sec.) • HOLD : Scan pauses on a received signal until it disappears. Rotate [R-DIAL] to resume manually. SCAN-PAUSE 2SEC -4SEC -6SEC -8SEC >10SEC -12SEC SCAN-PAUSE 12SEC -14SEC -16SEC -18SEC -20SEC >HOLD Scan pauses for 10 sec. Scan pauses until signal disappears 55 D Scan resume timer Selects scan resume time. Scan resumes after the specified period when the received signal disappears. •0 : Scan resumes immediately when the received signal disappears. • 1-5 : Scan pause 1-5 sec. after the received signal disappears. (default: 2 sec.) • HOLD : Scan pauses on the received signal even if it dis- appears. Rotate [R-DIAL] to resume manually. SCAN-RESUME 0SEC -1SEC >2SEC -3SEC -4SEC -5SEC SCAN-RESUME 1SEC -2SEC -3SEC -4SEC -5SEC >HOLD Scan resumes after 2 sec. Scan resumes manually D Scan stop beep Turns the scan stop beep function ON and OFF. When the function is activated ("ON" is selected), a long beep will sounds each time when signal is received during scan. SCAN-STOP-BEEP OFF -ON SCAN-STOP-BEEP OFF >ON No beep is sound when receiving a signal A long beep is sound when receiving a signal