Icom IC-R20 Instruction Manual - Page 65
Power save, Noise blanker, ANL function
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
SET MODE 10 D Power save The power save function reduces the current drain to conserve battery power. This power save function can be turned OFF, if desired. In the default setting ("AUTO" selection), the power save function is activated in 1:4 (125 msec.: 500 msec.) ratio when no signal is received for 5 sec. The ratio becomes 1:8 (125 msec.: 1 sec.) when no signal is received for another 60 sec. POWER-SAVE OFF -AUTO POWER-SAVE OFF >AUTO Power save OFF Power save ON D Noise blanker The noise blanker reduces pulse-type noise such as that generated by automobile ignition systems. This function is only effective for SSB/CW modes and not effective for non pulsetype noise. • OFF : The noise blanker function is turned OFF. (default) • ON : The noise blanker function is turned ON. NOISE BLANKER OFF -ON NOISE BLANKER OFF >ON Noise blanker is OFF Noise blanker is ON D ANL function The ANL (Automatic Noise Limitter) function reduces noise components when AM is selected. • OFF : The ANL function is turned OFF. (default) • ON : The ANL function is turned ON. ANL OFF -ON ANL OFF >ON ANL function is OFF ANL function is ON D AF filter 10 The AF filter suppresses high-pitch tone when this setting is ON. This function is not effective for FM mode. • OFF : The AF filter is deactivate. (default) • ON : The AF filter is activate. AF-FILTER OFF -ON AF-FILTER OFF >ON AF filter is OFF AF filter is ON 52