Icom IC-R20 Instruction Manual - Page 45
Memory clearing
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
MEMORY CHANNELS 6 ■ Memory clearing Contents of programmed memories can be cleared (blanked), if desired. qPush [MR S.MW] for 1 sec. to select the select memory write condition. • 1 short and 1 long beeps sound. • "µ " indicator blinks. • Do not hold [MR S.MW] for more than 2 sec. otherwise the memory contents will be copied to VFO. wRotate [R-DIAL] to select the desired memory channel to be cleared. eWhile pushing [8 SET], rotate [R-DIAL] to select "CLEAR." • "CLEAR" item can also be selected by pushing [8 SET] several times. [R-DIAL] MR S.MW SET 8 FM 144..010µ -BANK-:----BNAME: -MNAME: -SKIP-:OFF >CLEAR 028 SET After 8 is pushed several times. -BANK-:----BNAME: -MNAME: -SKIP-:OFF >CLEAR r Push [MR S.MW] for 1 sec. to clear the contents. • 3 beeps sound. • The cleared channel changes to blank channel • Return to the select memory write condition.- "µ " indicator blinks. Push [DUALWATCH] to exit the select memory write condition, then push [VFO MHz] to return to VFO mode. MR Push S.MW for 1 sec. 6 FM 144..010µ -BANK-:----BNAME: -MNAME: -SKIP-:OFF >CLEAR 028 FM 144..010µ -BANK-:----BNAME: -MNAME: -SKIP-:OFF >CLEAR 028 NOTE: Be careful!- the contents of cleared memories CANNOT be recalled even in bank channel operation. 32