Icom IC-R20 Instruction Manual - Page 13

QUICK REFERENCE GUIDE D Starting scan 1. Select VFO mode. Push [VFO MHz] to select the VFO mode for full, band and programmed scan operation. • Select memory mode by pushing [MR S.MW] for memory or bank scan. 2. Selecting a scanning type While pushing and holding [MODE SCAN], rotate [R-DIAL] to select one of the desired scanning type. • Available scan types when VFO mode is selected; "ALL" for full scan; "BAND" for the selected band; one of "PROGxx" (xx=0 to 24) for programmed scan. • Available scan types when memory bank is selected; "ALL" for all memory scan, "BANK-LINK" for banklink scan; "BANK" for the selected bank scan. Top DUALWATCH MAIN/SUB POWER BAND VFO MHz MODE SCAN MR S.MW 1 2 3 SCOPE 4 5 6 0 AFC 7 8 9 LOCK REC MODE SCAN Front • Full scan √ SCAN:ALL PSKIP • Band scan √ SCAN:BAND PSKIP • Programmed scan PSKIP √ SCAN:PROG-01 Selectable between "00" to "24" if programmed Quick reference guide 3. Starting scan Release [MODE SCAN] to start the scan. • Rotate [R-DIAL] to change the scanning direction. • During full/band scan • During programmed scan -DUP TSQL AFC MODE FM ANL 1408 080808 PSKIP √ -DUP TSQL AFC MODE FM ANL 1480 808080 PSKIP √ P01 • During memory/all/bank scan • During bank scan -DUP TSQL AFC MODE FM ANL 808080 808080 PSKIP √ µ 012 -DUP TSQL AFC MODE FM ANL 080808 080808 PSKIP √ µ P01 4. Cancelling scan Push [DUALWATCH] to stop the scan. ✔ For your information The memory channel number you program the scan edges into correlate "PROGxx" as follows: 00A/00B: Scan√s betweenPSfKrIePquencies programmed in 00A and S0C0ABN:AcLhLannels, and select "PROG-00" 01A/01B: Scans between frequencies programmed in 01A and S√0C1ABN:BcAhNaDnnePSlsKI,Pa•••nd select "PROG-01" 24A/24B: Scans between frequencies programmed in 24A PSKIP and √24B channels, and select "PROG-24" SCAN:PROG-01 VIII