Konica Minolta bizhub 25e bizhub 25e Administrators Guide - Page 73
Printing the LDAP setting list, Press [Setting] on My MFP Menu screen., Press [Management].
View all Konica Minolta bizhub 25e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Printing the LDAP setting list 1 Press [Setting] on My MFP Menu screen. If My MFP Menu screen is not displayed, press repeatedly until My MFP Menu screen is displayed. 2 Press [Management]. If an administrator password is set, enter the password and press [Enter]. 3 Press [Network Settings]. 4 Press [LDAP Server Setting]. 5 Press [List]. 6 Press [Yes]. Press [ON] to enable duplex printing, or [OFF] to disable it. NOTE Also, you can print the LDAP server list by following procedure. Press [Setting] on My MFP Menu screen [List] [LDAP Server] [Yes]. If My MFP Menu screen is not displayed, press repeatedly until My MFP Menu screen is displayed. 2-26 Specifying the network settings
2-26
Specifying the network settings
²
Printing the LDAP setting list
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Network Settings].
4
Press [LDAP Server Setting].
5
Press [List].
6
Press [Yes].
Press [ON] to enable duplex printing, or [OFF] to disable it.
NOTE
Also, you can print the LDAP server list by following procedure.
Press [Setting] on My MFP Menu screen
[List]
[LDAP Server]
[Yes].
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP
Menu screen is displayed.