Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 326
Format SSD, RAM Disk Mode, Restart., Are you sure?, Sys. Menu/Count., User/Job Account, User Property
View all Kyocera ECOSYS M6526cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
RAM Disk Mode: D b (1 - 64) **32* MB Default Setting (System Menu) 6 Press the OK key. If [Off] is selected and the OK key is pressed, proceed to step 8. If [On] is selected, the RAM disk size screen appears. Restart. Are you sure? 7 Enter the size of the RAM disk with the numeric keys. 8 Press the OK key. A confirmation screen appears. [ Yes ] [ No ] 9 Press [Yes] (the Left Select key). The machine is restarted. Format SSD When an optional SSD is inserted into the machine for the first time, it must be formatted before use. This menu is displayed only when the SSD is installed on the machine. NOTE: If the SSD is installed in the machine, the Document Box will be available. Formatting will destroy any existing data on a storage device including a used SSD. Formatting of the SSD must be executed from the machine. When the SSD has not yet been formatted, the Attention lamp flashes and Format SSD is displayed. Use the procedure below to format the SSD. When a new SSD is inserted in the machine's slot, Format SSD will appear on the message display. Sys. Menu/Count.: a b 4 User/Job Account 5 User Property *6**C*o*m*m*o*n**S*e*t*t*i*n*g*s**** [ Exit ] 1 In the Sys. Menu/Count. menu, press the or key to select [Common Settings]. Common Settings: a b *1 **L*a*n*g*u*a*g*e*********** 2 Default Screen 3 Sound [ Exit ] 2 Press the OK key. The Common Settings menu appears. 3 Press the or key to select [Format SSD]. 8-64