Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 458

Default Setting (System Menu) Optional Network This selects the settings for the optional network interface kit (IB-50) or wireless network interface kit (IB-51). NOTE: This is only displayed when a network interface kit (IB-50) or wireless network interface kit (IB-51) is installed as an option. Check with your network administrator when selecting the network setting. After all network related settings have been done, restart the network. Refer to Restart Network on page 8-206. This is mandatory to make the settings effective! When Command Center RX is used, network parameters and security settings can be conveniently changed and checked from your PC. For more information, refer to the Command Center RX User Guide TCP/IP Settings This selects the TCP/IP settings. The options available in the TCP/IP Settings are as follows: • TCP/IP ...8-197 • IPv4 Setting ...8-197 • IPv6 Setting ...8-197 Sys. Menu/Count.:a b 1 Report 2 Counter *3 **S*y*s*t*e*m*/*N*e*t*w*o*r*k***** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [System/Network], and press the OK key. Login User Name: L b Login Password: A login screen will appear. Then, enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). [ Login ] System/Network: a b *1**N*e*t*w*o*r*k**S*e*t*t*i*n*g**** 2 Optional Network 3 NW InterfaceSend [ Exit ] 2 The System/Network menu appears. 3 Press the  or  key to select [Optional Network]. 8-196