Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 451
System/Network, Network Setting, LDAP Security, Description
View all Kyocera ECOSYS M6526cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 451 highlights
Default Setting (System Menu) 9 Press the or key to select [HTTP/HTTPS] or [HTTPS only]. 10 Press the OK key. Completed. is displayed and the screen returns to the Secure Protocol menu. LDAP Security Select the communication protocol according to the type of security employed by the LDAP server. The default setting is Off. The table below shows the available settings. Item Description Off Do not use security employed by the LDAP server. SSL/TLS Encryption is applied any data communication. To enable LDAP security, the LDAP port may have to be changed according to the server settings. Typically, 636* for SSL/TLS is well-known LDAP port. STARTTLS Encryption is applied any data communication. Typically, 389* for STARTTLS is well-known LDAP port. * You can change the port number using Command Center RX. 8 Use the procedure below to make the setting. Sys. Menu/Count.:a b 1 Report 2 Counter *3 **S*y*s*t*e*m*/*N*e*t*w*o*r*k***** [ Exit ] 1 In the Sys. Menu/Count. menu, press the or key to select [System/Network], and press the OK key. Login User Name: L b Login Password: [ Login ] When you are performing user management and have not logged in, a login screen will appear. Then, enter the Login User Name and Login Password to log in, and press [Login] (the Right Select key). System/Network: a b *1**N*e*t*w*o*r*k**S*e*t*t*i*n*g**** 2 Optional Network 3 NW InterfaceSend [ Exit ] 2 The System/Network menu appears. 3 Press the or key to select [Network Setting]. 8-189