Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 565
Colored Paper, Preprinted Paper, Recycled Paper, Specifications, Appendix-21,
View all Kyocera ECOSYS M6526cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
The label surface must be covered completely with the top sheet. Gaps between labels may cause peeling of labels, resulting in a serious failure. Some label paper has large margins on the top sheet. When using such paper, do not peel these margins from the carrier sheet before completing output. Allowed Not allowed Top sheet Carrier sheet Use label paper that conforms to the following specifications. Item Top sheet weight Basis weight (overall paper weight) Top sheet thickness Overall paper thickness Moisture content Specifications 44 to 74 g/m² 104 to 151 g/m² 0.086 to 0.107 mm 0.115 to 0.145 mm 4 to 6 % (composite) Colored Paper Colored paper must conform to the specifications listed on the page 15 of the Appendix. In addition, the pigments in the paper must be able to withstand the heat of printing (up to 200°C or 392°F). NOTE: If you use colored paper quite often, we recommend to use paper feeder (multi purpose). Preprinted Paper Preprinted paper must conform to the specifications listed on the page 13 of the Appendix. The colored ink must be able to withstand the heat of printing. It must be resistant to silicone oil as well. Do not use paper with a treated surface such as glossy paper used for calendars. Recycled Paper Recycled paper must conform to the specifications listed on the page 15 of the Appendix; however, its whiteness may be considered separately. NOTE: Before purchasing recycled paper in volume, try testing a sample to ensure that the print quality. Appendix-21