Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 400

Default Setting (System Menu) Service Setting: a b *1**S*e*r*v*i*c*e**S*t*a*t*u*s***** 2 Network Status 3 Test Page [ Exit ] 4 Press the OK key. The Service Setting menu appears. Altitude Adj.: a b *1 **N*o*r*m*a*l 2 High 1 3 High 2 5 Press the  or  key to select [Altitude Adj.]. 6 Press the OK key. Altitude Adj. appears. 7 Press the  or  key to select [Normal], [High 1] or [High 2]. 8 Press the OK key. Completed. is displayed and the screen returns to the Service Setting menu. MC (Main charger output setting) This sets the output of the main charger. When print quality has deteriorated, the output of the main charger can be changed to restore print quality. NOTE: This menu only appears when the Altitude Adj. (Altitude adjustment setting) on page 8-137 is set to [Normal]. Use the procedure below to set the main charger output setting. Sys. Menu/Count.:a b ; Document Box < Edit Destination *= **A*d*j*u*s*t*/*M*a*i*n*t*.****** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [Adjust/Maint.]. Adjust/Maint.: a b *1**C*o*p*y**D*e*n*s*t*.**A*d*j*.*** 2 Send/Box Density 3 Backgrnd Density [ Exit ] 2 Press the OK key. The Adjust/Maint. menu appears. 3 Press the  or  key to select [Service Setting]. 8-138