Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 560

Choosing the Appropriate Paper This section describes guidelines for choosing paper. Condition Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface or paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor copies but may also cause jams and shorten the useful life of the machine. Choose paper with a smooth and even surface; however, avoid coated paper or paper with a treated surface as it may damage the drum or fusing unit. Ingredient Do not use paper such as paper that has been coated or surface-treated or paper that contains plastic or carbon. These paper may produce harmful fumes from the heat of printing and may damage the drum. Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper content consists of cotton or other fibers. Supported Paper Sizes Paper of the following sizes is supported by the machine. Measurements in the table take into account a ±0.7 mm dimensional accuracy for length and width. Corner angles must be 90° ± 0.2°. Multi Purpose Tray Cassette 1 or Multi Purpose Tray B6 (128 × 182 mm) Letter Envelope #10 (Commercial #10) (4 1/8 × 9 1/2") Legal Envelope #9 (Commercial #9) (3 7/8 × 8 7/8") Statement Envelope #6 (Commercial #6 3/4) (3 5/8 × 6 1/2") Executive Envelope Monarch (3 7/8 × 7 1/2") Oficio II Envelope DL (110 × 220 mm) A4 (297 × 210 mm) Hagaki (100 × 148mm) A5 (210 × 148 mm) Oufuku Hagaki (148 × 200 mm) A6 (105 × 148 mm) Youkei 4 (105 × 235 mm) B5 (257 × 182 mm) Youkei 2 (114 × 162 mm) ISO B5 (176 × 250 mm) Size Entry (70 × 148 to 216 × 356 mm) Folio (210 × 330 mm) 16K (273 × 197 mm) 216 × 340 mm Envelope C5 (162 × 229mm) Appendix-16