Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 57

Preparation before Use Energy Saver Function If a certain period of time elapses after the machine is last used, the machine automatically enters Low Power Mode to reduce power consumption. If a further period of time elapses without the machine being used, the machine automatically enters sleep mode, which minimizes power consumption. 2 Low Power Mode The message display backlight turn off to reduce the power consumption. This status is referred to as Low Power Mode. If print data is received during Low Power Mode, the machine automatically wakes up and starts printing. Also when fax data arrives while the machine is in Low Power Mode on products with the FAX function installed, the machine automatically wakes up and starts printing. To use the machine, press any key on the operation panel. The machine will be ready to use within 11 seconds. Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly. For information on the Low Power Mode settings, refer to Low Power Timer on page 8-149. NOTE: When a preset time of Low Power Timer and Sleep Timer is same, Sleep Mode overrides Low Power Mode. Sleep and Auto Sleep Sleep To enter Sleep, press the Energy Saver key. Message Display and all indicators on the operation panel will go out to save a maximum amount of power except the Main Power indicator. This status is referred to as Sleep. If print data is received during Sleep, the print job is performed while the Message Display remains unlit. If you are using the products equipped with the fax function, received fax data is printed out while the operation panel also remains unlit. There are two sleep modes (models except for Europe): Quick Recovery and Energy Saver. The default setting is Energy Saver mode. NOTE: When a preset time of Low Power Timer and Sleep Timer is same, Sleep Mode overrides Low Power Mode. 2-9