Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 399

Default Setting (System Menu) Service Setting: a b *1**S*e*r*v*i*c*e**S*t*a*t*u*s***** 2 Network Status 3 Test Page [ Exit ] 4 Press the OK key. The Service Setting menu appears. Start the drum refresh. Are you sure? 5 Press the  or  key to select [Drum Refresh]. 6 Press the OK key. A confirmation screen appears. [ Yes ] [ No ] 7 Press [Yes] (the Left Select key). Completed. is displayed and the screen returns to the Service Setting menu. 8 Altitude Adj. (Altitude adjustment setting) This sets the altitude adjustment mode. If you are using the machine at an altitude of 1500 m or higher and print quality has deteriorated, the Altitude Adjustment mode setting can be used to restore print quality. Use the procedure below to set the altitude adjustment setting. Sys. Menu/Count.:a b ; Document Box < Edit Destination *= **A*d*j*u*s*t*/*M*a*i*n*t*.****** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [Adjust/Maint.]. Adjust/Maint.: a b *1**C*o*p*y**D*e*n*s*t*.**A*d*j*.*** 2 Send/Box Density 3 Backgrnd Density [ Exit ] 2 Press the OK key. The Adjust/Maint. menu appears. 3 Press the  or  key to select [Service Setting]. 8-137