Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 388

Default Setting (System Menu) AutoColorCorrect This setting allows you to adjust the detection level used by the machine to determine whether the original is color or black and white during Auto Color Mode. Setting a lower value will result in more originals being identified as color, while a larger value will tend to increase the number of originals being identified as black and white. Use the procedure below to set the Auto Color Detection Level. Sys. Menu/Count.:a b ; Document Box < Edit Destination *= **A*d*j*u*s*t*/*M*a*i*n*t*.****** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [Adjust/Maint.]. Adjust/Maint.: a b *1**C*o*p*y**D*e*n*s*t*.**A*d*j*.*** 2 Send/Box Density 3 Backgrnd Density [ Exit ] 2 Press the OK key. The Adjust/Maint. menu appears. AutoColorCorrect: a b *1 **5 2 4 3 3 3 Press the  or  key to select [AutoColorCorrect]. 4 Press the OK key. AutoColorCorrect appears. 5 Press the or  key to select a value from [5] to [1]. 6 Press the OK key. Completed. is displayed and the screen returns to the Adjust/Maint. menu. ColorCalibration This machine contains a calibration function that automatically makes adjustments to compensate for changes that occur over time due to variations in the ambient temperature and humidity. So that the highest quality color printing can be maintained, this color calibration operation is carried out automatically each time the power to the machine is turned on. If color tone does not improve or color drift does not improve after executing this color adjustment, perform color print position correction on page 8-127. 8-126