Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 496
Maximum Number of, Incorrect account ID.
View all Kyocera ECOSYS M6526cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 496 highlights
Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Memory is full. Job is canceled. Paper jammed. Job not stored. Press [OK]. USB memory error. Job is canceled. Place original and press Start key. Remove original from document processor. Maximum Number of scanned pages. Job is canceled. Error occurred. Turn the main power switch off and on. Incorrect account ID. - - - - - Are there any originals left in the document processor? - Is the acceptable scanning count exceeded? - - Unable to continue the job as the memory is used up. Press the OK key. To print the same originals, follow the operations below. • Select [Photo] for the quality of copies. • Select a nagative value for the sharpness. • Select the paper size smaller to reduce. If it is not resolved, expand the printer memory. If a paper jam occurs, the machine will stop and the location of the jam will be indicated on the Message Display. Leave the machine on and follow the instruction to remove the jammed paper. Press the OK key to cancel storing. This job is canceled. Press the OK key. Remove originals from the document processor, put them back in their original order, and place them again. Press the Start key to resume printing. Press the Status/Job Cancel key and press [Cancel] to cancel the job. Remove originals from the document processor. Scanning cannot be performed due to insufficient memory of scanner. The job is canceled. Press the OK key. Press the OK key to print, send or store the scanned pages. Press the Status/Job Cancel key and press [Cancel] to cancel the job. System error has occurred. Turn the main power switch off and on. The Account ID does not match. Check the registered Account ID. - 10-16 - 2-67 - - - - - 10-10