Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 65
TCP/IP (IPv4) Setup (by Entering IP Addresses), IPv4 Setting, Auto-IP, IP Address, Exit ]
View all Kyocera ECOSYS M6526cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Preparation before Use IPv4 Setting: 11 Press the OK key. The IPv4 Setting menu appears. a b *1 **D*H*C*P 2 Auto-IP 3 IP Address 2 [ Exit ] DHCP: a b 1 Off 2****O*n 12 Press the or key to select [DHCP]. 13 Press the OK key. DHCP appears. IPv4 Setting: a b *1 **D*H*C*P 2 Auto-IP 3 IP Address [ Exit ] 14 Press the or key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. 15 Press the or key to select [Auto-IP]. Auto-IP: a b 1 Off 2****O*n 16 Press the OK key. Auto-IP appears. 17 Press the or key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. TCP/IP (IPv4) Setup (by Entering IP Addresses) Set up TCP/IP to connect to the Windows network. Set the IP addresses, subnet masks, and gateway addresses. The default settings are "TCP/IP Protocol: On, DHCP: On, Auto-IP: On". NOTE: Before setting an IP address, ask your network administrator if your network environment requires input of an IP address. If input is necessary, ask your network administrator to obtain an IP address for you. 2-17